
Encoder User Manual
Manual-MPEG4_ENCA-Rev1206
Copyright © KBC Networks 2011 Page 20 of 33 www.kbcnetworks.com
Select from the following options:
- QCIF
- CIF
- D1 (default)
Select from the following options:
- Constant (default): The streaming frame rate will
not vary regardless of conditions
- Variable: The streaming frame rate will vary
depending on condition of motion and change in the
video in order to maintain ideal image quality.
Select the desired constant frame rate (not applicable in
Variable Frame Rate). Constant Frame Rate options
include:
- 30 FPS (default)
- 15 FPS
- 10 FPS
- 1 ~ 7 FPS
If Variable Frame Rate is selected, the following options
are available:
- 30 FPS
- 15 FPS
- 7 FPS
- 5 FPS
- 1 ~ 3 FPS
Select the encoding compression type:
- MPEG-4 (default)
- MJPEG
If Variable Bit Rate is selected, video quality must also
be selected (Options: High, Middle, Low). Also input a
GOP Length which determines how many frames will be
sent in between each I Frame. If 0 is entered, only I
Frame will be transmitted each second.
Constant Bit Rate is the default setting.
The range of the bit rate is from 28 Kbps up to 3 Mbps,
with “UNLIMITED” an option as well. The default setting
is 1.2 Mbps
Select the Bit Rate of the video streaming. A lower bit
rate consumes less bandwidth but will result in lower
quality images. A high bit rate will consume more
bandwidth with higher quality picture.
Select the port for the encoder to support RTSP.
Video RTP over
Multicast
Enable/disable the multicast video streaming via RTP
protocol.
Audio RTP over
Multicast
Enable/disable the multicast audio streaming via RTP
protocol.
Commentaires sur ces manuels