Kbc-networks MPEG-4 Encoder Manuel d'utilisateur télécharger pdf

Introduction

Welcome to KBC Networks’ Quick Start Guide for

the IP Encoder. This document provides some

quick tips on how to get up and running. For

more detailed information see the Downloads

section below.

Features:

• MPEG4 compression encoding

• NTSC/PAL support

• RS-485/422, 232 support

• Bi-directional audio

• 2, DI/DO bi-directional contact closures

Downloads

Installation manual

Other features and functions are described in the

unabridged manual:

http://www.kbcnetworks.com/ip-

encoder/network-products/ip-encoder

Specification Sheets:

http://www.kbcnetworks.com/ip-

encoder/network-products/ip-encoder

Release Notes:

http://www.kbcnetworks.com/specification-

downloads/technical-release-notes

System Contents

Qty Description

1 Encoder

1 12Vdc PSU

Equipment Required for Physical

Deployment

Video only applications:

• Ethernet Cat5 cable

• Coaxial cable

Video and PTZ applications:

• Ethernet Cat5 cable

• Coaxial cable

• Shielded &/or twisted pair wire for RS Data

wiring (see diagram)

Contact Closure Applications:

• All above as required by application

• Relay to supply the following voltages:

Contact Closure Specification

Connection Design TTL-compatible logic

levels

Voltage Trigger

(low)

Logic level 0: 0V ~

0.4V

Normal

(high)

Logic level 1: 3.1V ~

30V

Current 10mA ~ 100mA

Connection Design TTL-compatible logic

levels

Voltage Trigger

(high)

Logic level 0: 2.4V ~

Normal

(low)

Logic level 1: 0.1V ~

0.6V

Current 50mA

Audio

applications:

• All above as required by application

• Amplified audio source with stereo cable

and 3.5mm jack

Configuring the ENC-A-W*

Refer to provided documentation for pre-set

configuration settings. The following procedures

may be necessary if purchased from distribution

stock or in order to set custom configurations.

1. Connect an Ethernet crossover cable from

the LAN/WAN port of the encoder to either a

laptop or a PC LAN port.

2. Verifiy that the static IP address on the

laptop is set to 192.168.1.x subnet.

3. Open a web browser to access the Host on its

192.168.1.100 IP address; this is the default

address for the unit.

4. Enter the following to access the GUI:

ID: admin Password: admin

Note: Ensure that all other network interface

connections including your laptop Wifi &

Windows Firewall are disabled.

5. Select: ‘Set Up’ to exit from the video

display and access the product menu.

If the IP address must be changed: Select:

<WAN Setting> make appropriate

configuration changes.

Select: <Apply>

Select: <Save>

Quick Start

Guide

ENC-A-W*

Encoder

QSG_Encoder_MPEG4-Rev1206 www.kbcnetworks.com

1 2

Quick Start 1
Quick Start Guide 2

Résumé du contenu

Page 1 - Quick Start

Introduction Welcome to KBC Networks’ Quick Start Guide for the IP Encoder. This document provides some quick tips on how to get up and running.

Page 2 - Quick Start Guide

Note: Other configuration changes can be saved without <save/reboot> following each individual change. However, after the WAN settings are

Commentaires sur ces manuels

Pas de commentaire

Kbc-networks MPEG-4 Encoder Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires pour ordinateurs Kbc-networks MPEG-4 Encoder. KBC Networks MPEG-4 Encoder User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour ordinateurs Kbc-networks MPEG-4 Encoder